The Ryobi PSBRA02K is the complete kit version of the ONE+ HP 18V brushless compact right-angle drill, pairing the PSBRA02B bare tool with a 1.5 Ah 18V ONE+ battery and charger for buyers who need everything ready to work out of the box. The 3.6 in. head profile lets it reach wall cavities, cabinet interiors, and floor joists that block a full-size drill, while 350 in-lbs of torque and a 2-speed gearbox handle both slow high-torque driving and faster drilling in a single tool. The 3/8 in. single-sleeve keyless chuck accepts standard drill and driver bits up to 3/8 in. shank without a chuck key. At 2.5 lbs, it stays manageable in tight overhead and sidewall positions common in plumbing and electrical rough-in work.
What does the PSBRA02K kit include?
The PSBRA02K ships with the PSBRA02B right-angle drill, one 18V 1.5 Ah ONE+ battery, and an 18V charger. It is a complete starter package for buyers adding a right-angle drill to their toolkit for the first time.
Is the 1.5 Ah battery enough for right-angle drilling tasks?
For intermittent use — drilling pilot holes, driving lag screws in confined spaces, or short rough-in sessions — the 1.5 Ah battery is adequate. For extended continuous use, upgrading to a 2.0 Ah or 4.0 Ah ONE+ battery will provide meaningfully longer runtime between charges.
How does the PSBRA02K compare to the PSBRA02B bare tool?
The drill motor and head are identical. The PSBRA02K adds a 1.5 Ah 18V ONE+ battery and charger. If you already own Ryobi 18V ONE+ batteries, the PSBRA02B bare tool saves you from paying for a battery and charger you do not need.
Can I upgrade to a higher-capacity battery with this drill?
Yes. The PSBRA02K drill is compatible with any Ryobi 18V ONE+ battery. Swapping the included 1.5 Ah pack for a 4.0 Ah or 6.0 Ah HIGH PERFORMANCE cell will extend runtime significantly without any change in tool performance.
What types of jobs is the PSBRA02K best suited for?
The PSBRA02K excels at electrical and plumbing rough-in work where drilling through studs or joists from inside a wall cavity is required, as well as cabinet installation, HVAC ductwork attachment, and any application where the 3.6 in. head profile fits where a standard drill cannot. It is not intended to replace a full-size drill for open-air general drilling tasks.
# Ryobi ONE+ HP 18V Brushless Compact 3/8 in. Right Angle Drill Kit (1.5 Ah) **Model:** `PSBRA02K` **Brand:** Ryobi **Category:** Right Angle Drill > The Ryobi PSBRA02K is the complete kit version of the ONE+ HP 18V brushless compact right-angle drill, pairing the PSBRA02B bare tool with a 1.5 Ah 18V ONE+ battery and charger for buyers who need everything ready to work out of the box. The 3.6 in. head profile lets it reach wall cavities, cabinet interiors, and floor joists that block a full-size drill, while 350 in-lbs of torque and a 2-speed gearbox handle both slow high-torque driving and faster drilling in a single tool. The 3/8 in. single-sleeve keyless chuck accepts standard drill and driver bits up to 3/8 in. shank without a chuck key. At 2.5 lbs, it stays manageable in tight overhead and sidewall positions common in plumbing and electrical rough-in work. ## Specifications | Attribute | Value | |---|---| | Product Type | Right Angle Drill | | Voltage (V) | 18 | | Platform | ONE+ HP | | Cordless / Corded | Cordless | | Motor Type | Brushless | | Chuck Size (in.) | 0.375 | | Chuck Type | 3/8 in. Single-Sleeve Keyless | | Max Torque (in-lbs) | 350 | | No-Load Speed (RPM) | 0–450 / 0–1,700 | | Speed Settings | 2 | | Tool Only | No | | Batteries Included | 1 | | Battery Ah | 1.5 | | Battery Included | Yes | | Charger Included | Yes | | Length (in.) | 3.6 | | Weight (lbs) | 2.5 | | Warranty | 3-year limited | ## What's Included - (1) RYOBI ONE+ HP 18V Brushless Compact 3/8 in. Right Angle Drill (PSBRA02B) - (1) 18V 1.5 Ah ONE+ Battery - (1) 18V Charger Source: https://www.jaspecs.com/ryobi/right-angle-drill/psbra02k-ryobi-18v-one-hp-compact-brushless-3-8-in-right-angle-drill-kit/