The Ryobi PSBRA02B is an 18V ONE+ HP brushless right-angle drill built around a 3.6 in. head profile that fits into wall cavities, between studs, and behind cabinet frames where a standard drill cannot maneuver. The brushless motor delivers 350 in-lbs of torque through a 2-speed gearbox — 0–450 RPM for high-torque driving and 0–1,700 RPM for faster drilling — paired with a 3/8 in. single-sleeve keyless chuck for fast bit swaps. At 2.5 lbs, it is light enough to control in awkward one-handed positions common in plumbing and electrical rough-in work. Compatible with any Ryobi 18V ONE+ battery, it integrates cleanly into an existing ONE+ tool collection without requiring a separate battery platform.
What is a right-angle drill used for?
A right-angle drill drives the chuck at 90 degrees to the motor body, allowing you to drill and drive fasteners in confined spaces — between wall studs, inside cabinet boxes, under sinks, and in floor joists — where the length of a standard drill makes it impossible to work. It is a common tool for plumbers, electricians, and carpenters during rough-in framing.
Does the PSBRA02B come with a battery?
No. The PSBRA02B is a bare tool and does not include a battery or charger. You need a Ryobi 18V ONE+ battery to operate it. If you need a battery and charger included, the PSBRA02K kit bundles the same drill with a 1.5 Ah ONE+ battery and charger.
What chuck size does the PSBRA02B use?
The PSBRA02B has a 3/8 in. single-sleeve keyless chuck. This accommodates the large majority of drill bits and driver bits up to 3/8 in. shank, and the keyless mechanism allows quick one-handed bit changes without a chuck key.
What is the difference between the PSBRA02B and the PSBRA02K?
The drill itself is identical in both configurations. The PSBRA02K kit adds a 1.5 Ah 18V ONE+ battery and an 18V charger. The PSBRA02B bare tool is the right choice if you already own compatible Ryobi 18V ONE+ batteries and want to avoid paying for redundant charging equipment.
What is the profile length of the PSBRA02B?
The PSBRA02B has a 3.6 in. head profile — the measurement from the back of the head to the tip of the chuck. This compact dimension is what allows the drill to fit in spaces that would block a standard inline drill, which typically measures 7 in. or more in length.
# Ryobi ONE+ HP 18V Brushless Compact 3/8 in. Right Angle Drill (Tool Only) **Model:** `PSBRA02B` **Brand:** Ryobi **Category:** Right Angle Drill > The Ryobi PSBRA02B is an 18V ONE+ HP brushless right-angle drill built around a 3.6 in. head profile that fits into wall cavities, between studs, and behind cabinet frames where a standard drill cannot maneuver. The brushless motor delivers 350 in-lbs of torque through a 2-speed gearbox — 0–450 RPM for high-torque driving and 0–1,700 RPM for faster drilling — paired with a 3/8 in. single-sleeve keyless chuck for fast bit swaps. At 2.5 lbs, it is light enough to control in awkward one-handed positions common in plumbing and electrical rough-in work. Compatible with any Ryobi 18V ONE+ battery, it integrates cleanly into an existing ONE+ tool collection without requiring a separate battery platform. ## Specifications | Attribute | Value | |---|---| | Product Type | Right Angle Drill | | Voltage (V) | 18 | | Platform | ONE+ HP | | Cordless / Corded | Cordless | | Motor Type | Brushless | | Chuck Size (in.) | 0.375 | | Chuck Type | 3/8 in. Single-Sleeve Keyless | | Max Torque (in-lbs) | 350 | | No-Load Speed (RPM) | 0–450 / 0–1,700 | | Speed Settings | 2 | | Tool Only | Yes | | Batteries Included | 0 | | Battery Included | No | | Charger Included | No | | Length (in.) | 3.6 | | Weight (lbs) | 2.5 | | Warranty | 3-year limited | ## What's Included - (1) RYOBI ONE+ HP 18V Brushless Compact 3/8 in. Right Angle Drill (PSBRA02B) Source: https://www.jaspecs.com/ryobi/right-angle-drill/psbra02b-ryobi-18v-one-hp-compact-brushless-3-8-in-right-angle-drill-tool-only/