The Moen S664SRS is the Spot Resist Stainless version of the Traditional wall-mount pot filler, combining the classic lever-handle silhouette with a finish treatment that repels water spots and fingerprints near a steam-producing cooktop environment. The dual-joint folding arm extends to 24.375 inches, reaching all burners on most standard residential ranges, and two lever handles provide independent shut-off points for safety and convenience. The 5.5 GPM flow rate fills large stockpots significantly faster than a standard kitchen faucet, reducing stove time for pasta, canning, and batch cooking. The faucet connects directly to a dedicated 1/2 in. IPS cold-water stub-out in the wall; supply lines are not included and are not part of this installation type.
What plumbing rough-in is required for the S664SRS?
The S664SRS requires a dedicated 1/2 in. IPS cold-water supply stub-out installed in the wall at the correct height behind the range or cooktop. If that rough-in does not already exist, a licensed plumber will need to run a new supply line and install a stub-out before mounting the pot filler.
Why choose Spot Resist Stainless for a pot filler over chrome?
Pot fillers are mounted above a cooktop where steam and cooking residue are constant. Spot Resist Stainless repels water mineral deposits and fingerprints more effectively than polished chrome, keeping the faucet looking clean in a high-humidity above-range environment with less frequent wiping.
Are supply lines included with the S664SRS?
No. Pot fillers mount directly to a wall supply stub-out and do not use flexible supply lines the way under-sink faucets do. The included hardware covers the faucet body, swing arm, lever handles, escutcheon, and mounting fasteners.
Can the pot filler arm reach all burners on a 36-inch range?
The arm extends to 24.375 inches from the wall, which is typically sufficient to cover all four or six burners on a standard 36-inch range. Measure from the wall to the farthest burner at pot-rim height to confirm reach before purchasing and roughing in the supply.
What does the Limited Lifetime Warranty cover on the S664SRS?
Moen's Limited Lifetime Warranty covers defects in materials, workmanship, and finish for the original residential owner for the life of their home ownership. If a manufacturing defect occurs, Moen will repair or replace the product at no charge to the owner.
# Moen Traditional Two-Handle Wall-Mount Pot Filler (Spot Resist Stainless) **Model:** `S664SRS` **Brand:** Moen **Category:** Pot Filler > The Moen S664SRS is the Spot Resist Stainless version of the Traditional wall-mount pot filler, combining the classic lever-handle silhouette with a finish treatment that repels water spots and fingerprints near a steam-producing cooktop environment. The dual-joint folding arm extends to 24.375 inches, reaching all burners on most standard residential ranges, and two lever handles provide independent shut-off points for safety and convenience. The 5.5 GPM flow rate fills large stockpots significantly faster than a standard kitchen faucet, reducing stove time for pasta, canning, and batch cooking. The faucet connects directly to a dedicated 1/2 in. IPS cold-water stub-out in the wall; supply lines are not included and are not part of this installation type. ## Specifications | Attribute | Value | |---|---| | Product Type | Wall-Mount Pot Filler | | Collection | Traditional | | Finish | Spot Resist Stainless | | Finish Code | SRS | | Mounting Type | Wall-Mount | | Spout Reach In | 24.375 | | Flow Rate Gpm | 5.5 | | Handle Count | 2 | | Supply Lines Included | No | | Ada Compliant | Yes | | Warranty | Limited Lifetime | ## What's Included - (1) Moen Traditional Pot Filler Body with Dual-Joint Swing Arm (S664SRS) - (2) Lever Handles - (1) Wall Escutcheon - (1) Mounting Hardware Source: https://www.jaspecs.com/moen/pot-filler/s664srs-moen-traditional-pot-filler-spot-resist-stainless/