The Moen S664 is a wall-mount pot filler in the Traditional collection, featuring a dual-joint folding swing arm that extends to 24.375 inches to reach any burner on a residential cooktop or range. Two lever handles — one at the wall joint and one mid-arm — provide independent shut-off points, which is considered best practice for pot fillers because it reduces the risk of a single-point failure allowing water to flow uncontrolled to the stovetop. The 5.5 GPM high-flow rate fills large stockpots and canning kettles quickly without the restriction of a standard kitchen faucet. The S664 connects directly to a dedicated 1/2 in. IPS cold-water stub-out roughed into the wall behind the range; supply lines are not included and are not needed since the faucet mounts to the wall supply directly.
What wall supply connection does the Moen S664 pot filler require?
The S664 requires a dedicated 1/2 in. IPS cold-water stub-out roughed into the wall at the appropriate height behind your range or cooktop. This is a separate rough-in from your kitchen sink supply and typically requires a licensed plumber to install if the supply line does not already exist.
Does the S664 come with supply lines?
No. Supply lines are not included because the pot filler mounts directly to the wall water supply stub-out — there is no flexible hose connection under a sink. The faucet body, swing arm, handles, escutcheon, and mounting hardware are included.
Why does a pot filler have two handles?
The dual-handle design provides two independent shut-off points: one at the wall where the arm connects and one midway along the swing arm. This is best practice for pot fillers because if one valve ever fails, the second provides a backup shut-off before water reaches the cooktop. It also allows the arm to be extended with water off, then turned on only when the pot is positioned.
How far does the S664 arm reach and is it enough for a wide range?
The dual-joint swing arm extends to 24.375 inches from the wall, which is sufficient to reach all four burners on most standard 30-inch and 36-inch residential ranges. For very wide ranges or commercial-style appliances with unusual burner placement, measure from the wall to the farthest burner before purchasing.
Is the Moen S664 covered by a warranty?
Yes. Moen backs the S664 with a Limited Lifetime Warranty to the original residential purchaser covering defects in materials, workmanship, and finish for the life of home ownership. Moen will replace defective parts or the faucet at no charge if a covered defect is reported.
# Moen Traditional Two-Handle Wall-Mount Pot Filler (Chrome) **Model:** `S664` **Brand:** Moen **Category:** Pot Filler > The Moen S664 is a wall-mount pot filler in the Traditional collection, featuring a dual-joint folding swing arm that extends to 24.375 inches to reach any burner on a residential cooktop or range. Two lever handles — one at the wall joint and one mid-arm — provide independent shut-off points, which is considered best practice for pot fillers because it reduces the risk of a single-point failure allowing water to flow uncontrolled to the stovetop. The 5.5 GPM high-flow rate fills large stockpots and canning kettles quickly without the restriction of a standard kitchen faucet. The S664 connects directly to a dedicated 1/2 in. IPS cold-water stub-out roughed into the wall behind the range; supply lines are not included and are not needed since the faucet mounts to the wall supply directly. ## Specifications | Attribute | Value | |---|---| | Product Type | Wall-Mount Pot Filler | | Collection | Traditional | | Finish | Chrome | | Finish Code | C | | Mounting Type | Wall-Mount | | Spout Reach In | 24.375 | | Flow Rate Gpm | 5.5 | | Handle Count | 2 | | Supply Lines Included | No | | Ada Compliant | Yes | | Warranty | Limited Lifetime | ## What's Included - (1) Moen Traditional Pot Filler Body with Dual-Joint Swing Arm (S664) - (2) Lever Handles - (1) Wall Escutcheon - (1) Mounting Hardware Source: https://www.jaspecs.com/moen/pot-filler/s664-moen-traditional-pot-filler-chrome/