The Kohler Elate K-33591-4-CP is a two-handle centerset faucet with a restrained, transitional profile that works well in practical guest baths and everyday primary-bath updates. Its 4-inch centerset layout keeps installation straightforward on common 3-hole sinks, while the 1.2 GPM flow rate and ceramic disc valves focus on efficient daily use with reliable handle operation.
What sink setup does the Elate K-33591-4-CP fit?
This faucet is built for a 4-inch centerset sink with three mounting holes. That means the spout and both handles install as a compact assembly sized for standard bathroom vanity tops with a pre-drilled centerset layout. It is not the right match for a widespread sink with separate 8-inch to 16-inch handle spacing. If your current faucet has a tight three-hole pattern on a 4-inch spread, this is the correct style.
How durable is the Polished Chrome finish, and how should it be cleaned?
Polished Chrome is one of the easier faucet finishes to live with because it resists corrosion well and is simple to wipe clean. For routine care, use a soft cloth with mild soap and water, then dry the surface to reduce spotting. Avoid abrasive pads, powdered cleansers, and harsh acidic sprays that can dull the finish over time. That basic cleaning routine is usually enough to keep the faucet looking bright.
Is this faucet considered water efficient and WaterSense certified?
Yes. This model is rated at 1.2 gallons per minute, which meets your WaterSense rule for bathroom faucets in this set. That lower flow rate helps reduce water use without pushing the faucet into an ultra-low-flow niche configuration. For most bathroom sink tasks like handwashing and brushing teeth, 1.2 GPM is a practical efficiency target.
How difficult is installation for a typical replacement?
Installation is usually moderate rather than difficult because centerset faucets are compact and designed around a common sink drilling pattern. If you are replacing another 4-inch centerset faucet, the layout should be familiar and the job mainly comes down to access under the sink, water line hookups, and securing the drain. The ceramic disc valve design does not add installation complexity. Most of the effort is the usual bathroom faucet work, not something unique to this model.
What comes in the box with the Elate centerset faucet?
The package includes the faucet body, the matching pop-up drain assembly, and standard mounting hardware. Because this is a centerset faucet, it does not use a separate deck plate to bridge a one-hole installation. Supply tubes and shutoff valves should still be verified separately depending on your sink setup. The included drain is useful if you want the finish and hardware to match from the start.
# Kohler Elate Centerset Bathroom Sink Faucet **Model:** `K-33591-4-CP` **Brand:** Kohler **Category:** Bathroom Faucet > The Kohler Elate K-33591-4-CP is a two-handle centerset faucet with a restrained, transitional profile that works well in practical guest baths and everyday primary-bath updates. Its 4-inch centerset layout keeps installation straightforward on common 3-hole sinks, while the 1.2 GPM flow rate and ceramic disc valves focus on efficient daily use with reliable handle operation. ## Specifications | Attribute | Value | |---|---| | Faucet Type | centerset | | Configuration | 4-inch centerset, 3-hole | | Handle Count | 2 | | Gpm | 1.2 | | Valve | ceramic disc | | Drain Assembly Included | Yes | | Deck Plate Included | No | | Finish | Polished Chrome | | Water Sense Certified | Yes | | Warranty | Limited Lifetime | ## What's Included - Faucet body - Pop-up drain assembly - Mounting hardware Source: https://www.jaspecs.com/kohler/bathroom-faucet/k-33591-4-cp-kohler-elate-centerset-bathroom-faucet/