The Ryobi PBLID04B is the next-generation 4-mode ONE+ HP brushless impact driver, rated up to 47% faster than the prior PBLID02B generation. It pushes torque to 2,300 in-lbs and max speed to 3,400 RPM, while trimming the body to a more compact 5.1 in. length. The four speed modes — including a self-tapping screw assist — give users precise control from delicate furniture hardware to heavy structural lag screws. As a bare tool it pairs with any existing 18V ONE+ battery; those needing a kit with the prior-gen driver can consider the PBLID02K.
How much faster is the PBLID04B than the previous model?
Ryobi claims up to 47% faster driving performance compared to the prior-generation PBLID02B. This comes from higher max speeds (0–3,400 vs. 0–2,900 RPM) and higher impact rates (4,200 vs. 4,000 IPM).
Does the PBLID04B come with a battery?
No. The PBLID04B is a bare tool. You will need a Ryobi 18V ONE+ battery and charger, sold separately. For a complete kit with batteries, consider the prior-gen PBLID02K.
What are the 4 modes on the PBLID04B?
Mode 1 (low, 0–950 RPM) for precision fastening, Mode 2 (medium, 0–2,100 RPM) for general use, Mode 3 (high, 0–3,400 RPM) for maximum driving power, and Mode 4 (self-tapping screw assist) which automatically stops once the fastener seats.
How does the PBLID04B compare in size to the prior model?
The PBLID04B is more compact at 5.1 in. long compared to the PBLID02B at 5.5 in. It is slightly heavier (2.5 vs. 2.3 lbs) despite the shorter body, which reflects the upgraded motor internals.
Is the PBLID04B worth the upgrade from PBLID02B?
If you are buying new, the PBLID04B is the better choice — more torque, faster speeds, and a more compact body for the same bare-tool category. If you already own the PBLID02B and it meets your needs, the performance gain may not justify replacement.
# Ryobi ONE+ HP 18V Brushless 4-Mode 1/4 in. Impact Driver (Tool Only) **Model:** `PBLID04B` **Brand:** Ryobi **Category:** Impact Driver > The Ryobi PBLID04B is the next-generation 4-mode ONE+ HP brushless impact driver, rated up to 47% faster than the prior PBLID02B generation. It pushes torque to 2,300 in-lbs and max speed to 3,400 RPM, while trimming the body to a more compact 5.1 in. length. The four speed modes — including a self-tapping screw assist — give users precise control from delicate furniture hardware to heavy structural lag screws. As a bare tool it pairs with any existing 18V ONE+ battery; those needing a kit with the prior-gen driver can consider the PBLID02K. ## Specifications | Attribute | Value | |---|---| | Voltage (V) | 18 | | Platform | ONE+ HP | | Motor Type | Brushless | | Drive Size In | 0.25 | | Max Torque (in-lbs) | 2,300 | | No-Load Speed (RPM) | 0–950 / 0–2,100 / 0–3,400 + Assist | | Max Ipm | 4,200 | | Speed Modes | 4 | | Tool Only | Yes | | Batteries Included | 0 | | Battery Included | No | | Charger Included | No | | Length (in.) | 5.1 | | Weight (lbs) | 2.5 | | Warranty | 3-year limited | ## What's Included - (1) RYOBI ONE+ HP 18V Brushless 4-Mode 1/4 in. Impact Driver (PBLID04B) Source: https://www.jaspecs.com/ryobi/impact-driver/pblid04b-ryobi-18v-one-hp-brushless-4-mode-impact-driver-tool-only-gen2/