VERIFIED · 2026 canonical · www.jaspecs.com

Moen Modern Two-Handle Wall-Mount Pot Filler (Spot Resist Stainless)

Model number
S665SRS

The Moen S665SRS pairs the Modern collection's angular, contemporary silhouette with Spot Resist Stainless, a finish engineered to repel water spots and fingerprints in the steam-heavy environment above a residential range. The dual-joint folding arm reaches 24.375 inches to cover all burners on most standard ranges, and the 5.5 GPM flow rate fills large pots roughly three times faster than a conventional 1.5 GPM kitchen faucet. Two independent lever handles — one at the wall and one mid-arm — provide redundant shut-off control, meeting the safety standard recommended for all residential pot filler installations. The faucet connects to a dedicated 1/2 in. IPS cold-water wall stub-out; supply lines are not included and are not part of a wall-mount pot filler connection.

identifiers stable · addressable
Model no.
S665SRS
Brand
Moen
Category
Pot Filler
Canonical URL
/moen/pot-filler/s665srs-moen-modern-pot-filler-spot-resist-stainless/
Official page moen.com →
11 spec rows · each row is anchorable

§ Specifications

#specifications
Product Type
Wall-Mount Pot Filler
Collection
Modern
Finish
Spot Resist Stainless
Finish Code
SRS
Mounting Type
Wall-Mount
Spout Reach In
24.375
Flow Rate Gpm
5.5
Handle Count
2
Supply Lines Included
No
Ada Compliant
Yes
Warranty
Limited Lifetime

§ What's Included

01 (1) Moen Modern Pot Filler Body with Dual-Joint Swing Arm (S665SRS)
02 (2) Lever Handles
03 (1) Wall Escutcheon
04 (1) Mounting Hardware

§ Warranty

Limited Lifetime

§ FAQ

What wall plumbing is required to install the Moen S665SRS?

The S665SRS requires a dedicated 1/2 in. IPS cold-water stub-out installed in the wall at the appropriate height behind the range — typically 24 to 30 inches above the countertop, aligned with the pot filler mounting point. If this rough-in does not exist, a licensed plumber will need to install it before the faucet can be mounted.

Why is Spot Resist Stainless recommended for a pot filler over a range?

Above-range installations expose the pot filler to cooking steam, grease particles, and water drips. Spot Resist Stainless applies a protective coating that deflects water mineral deposits and oils, so the faucet stays presentable with less frequent cleaning compared to polished chrome, which shows every water drop and smudge in this environment.

Are supply lines included with the S665SRS?

No. Pot fillers mount directly to a wall supply stub-out and do not use flexible supply lines. The included components — faucet body with swing arm, two lever handles, wall escutcheon, and mounting hardware — are everything needed for the faucet itself. Plumbing the stub-out is a separate scope of work.

How does the Modern S665SRS differ from the Traditional S664SRS?

The two faucets are functionally identical, sharing the same arm reach, flow rate, and dual-handle valve configuration. The difference is design: S665SRS uses squared, flat-profile lever handles and angular arm joints suited to modern and contemporary kitchens, while S664SRS uses rounded lever handles and softer curves that fit traditional and transitional styles.

Does the Moen S665SRS carry a warranty?

Yes. Moen provides a Limited Lifetime Warranty to the original residential purchaser covering defects in materials, workmanship, and finish for the duration of home ownership. Moen will repair or replace the faucet or any defective part at no charge if a covered defect is reported.