The Moen 84505BL brings the Lindor single-hole bathroom faucet to a Matte Black finish. The Lindor collection's rounded, transitional forms take on a dramatic quality in flat black — the organic curves and soft angles contrast strongly with white or light-colored countertops and sinks. The spout rises 4.13 inches with a 4.80-inch reach, providing comfortable clearance for standard undermount and drop-in basins. The spring-loaded pop-up drain eliminates the traditional lift rod: press the stopper to close, press again to open. A deck plate for 3-hole sink installation and 32-inch supply lines with 3/8-inch compression fittings are included. Rated 1.2 GPM.
Can the Moen 84505BL be installed on a 3-hole sink?
Yes. A Matte Black deck plate is included in the box. Position the deck plate over all three holes, then mount the faucet through the center hole. The plate is finish-matched and requires no extra purchase.
How does the spring-loaded pop-up drain on the Lindor work?
The spring-loaded drain uses a press-to-actuate mechanism in the stopper itself — no lift rod extends from the faucet body. Press the stopper down to close the drain; press it again to release the spring and open the drain. This eliminates the traditional lift-rod linkage assembly.
Does Matte Black show water spots or mineral deposits?
Dark matte surfaces can make hard-water mineral deposits more visible than lighter or brushed finishes. Wiping the faucet and basin area dry after use significantly reduces buildup. Moen's Limited Lifetime Warranty covers finish defects — including peeling and corrosion — under normal residential conditions.
How do I replace the cartridge in the Moen 84505BL if it drips?
Use Moen's parts lookup with model 84505BL to identify the correct cartridge. Shut the supply valves, remove the handle cap and set screw, pull off the handle, and extract the cartridge with puller pliers. Moen provides free cartridge replacements under its Limited Lifetime Warranty when a covered faucet develops a drip.
What Lindor Matte Black accessories are available to coordinate with the 84505BL?
The Lindor collection in Matte Black includes towel bars, towel rings, toilet paper holders, and robe hooks. Matching accessories by collection name and finish code ensures that the rounded transitional forms carry through the entire bathroom.
# Moen Lindor Single-Hole Single-Handle Bathroom Faucet (Matte Black) **Model:** `84505BL` **Brand:** Moen **Category:** Bathroom Faucet > The Moen 84505BL brings the Lindor single-hole bathroom faucet to a Matte Black finish. The Lindor collection's rounded, transitional forms take on a dramatic quality in flat black — the organic curves and soft angles contrast strongly with white or light-colored countertops and sinks. The spout rises 4.13 inches with a 4.80-inch reach, providing comfortable clearance for standard undermount and drop-in basins. The spring-loaded pop-up drain eliminates the traditional lift rod: press the stopper to close, press again to open. A deck plate for 3-hole sink installation and 32-inch supply lines with 3/8-inch compression fittings are included. Rated 1.2 GPM. ## Specifications | Attribute | Value | |---|---| | Product Type | Single-Hole Bathroom Faucet | | Collection | Lindor | | Finish | Matte Black | | Finish Code | BL | | Mounting Holes | 1 | | Deck Plate Included | Yes | | Spout Height In | 4.13 | | Spout Reach In | 4.8 | | Flow Rate Gpm | 1.2 | | Handle Count | 1 | | Drain Included | Yes | | Drain Type | Spring-loaded pop-up drain assembly | | Ada Compliant | Yes | | Supply Lines Included | Yes | | Warranty | Limited Lifetime | ## What's Included - (1) Moen Lindor Faucet Body (84505BL) - (1) Single Lever Handle - (1) Spring-Loaded Pop-Up Drain Assembly - (1) Deck Plate - (1) Flexible Supply Lines (32 in., 3/8 in. compression) - (1) Mounting Hardware - (1) Installation Instructions Source: https://www.jaspecs.com/moen/bathroom-faucet/84505bl-moen-lindor-single-hole-bathroom-faucet-matte-black/