VERIFIED · 2026 canonical · www.jaspecs.com

Moen Align Single-Hole Single-Handle Low-Arc Bathroom Faucet (Brushed Nickel)

Model number
6191BN

The Moen 6191BN brings the angular, modern geometry of the Align collection to a single-hole bathroom faucet in Brushed Nickel. The low-arc spout sits at 1.75 inches, keeping the profile compact and well-suited to shallower vessel sinks or standard undermount basins where clearance is tight. A single lever handle controls both temperature and flow, and the WaterSense-certified 1.2 GPM aerator reduces water consumption without sacrificing feel at the hands. The metal lift-rod pop-up drain assembly is included and coordinated to the faucet finish. The deck plate is sold separately, allowing this model to be specified for true single-hole installations without the bulk of an unused plate.

identifiers stable · addressable
Model no.
6191BN
Brand
Moen
Category
Bathroom Faucet
Canonical URL
/moen/bathroom-faucet/6191bn-moen-align-single-hole-bathroom-faucet-brushed-nickel/
Official page moen.com →
15 spec rows · each row is anchorable

§ Specifications

#specifications
Product Type
Single-Hole Bathroom Faucet
Collection
Align
Finish
Brushed Nickel
Finish Code
BN
Mounting Holes
1
Deck Plate Included
No
Spout Height In
1.75
Spout Reach In
4.5
Flow Rate Gpm
1.2
Handle Count
1
Drain Included
Yes
Drain Type
Metal lift-rod pop-up drain assembly
Ada Compliant
Yes
Supply Lines Included
Yes
Warranty
Limited Lifetime

§ What's Included

01 (1) Moen Align Faucet Body (6191BN)
02 (1) Single Lever Handle
03 (1) Metal Pop-Up Drain Assembly with Lift Rod
04 (1) Red/Blue Temperature Indicators
05 (1) Flexible Supply Lines
06 (1) Mounting Hardware
07 (1) Installation Instructions

§ Warranty

Limited Lifetime

§ FAQ

Can the Moen 6191BN be installed on a 3-hole sink?

The 6191BN is designed for a single-hole installation. A deck plate is not included in the box but is sold separately by Moen, allowing you to cover a 3-hole sink if needed. If you have a 3-hole sink and want the deck plate bundled, consider the Align high-arc model 6190BN, which includes one.

How does the lift-rod pop-up drain work?

The metal lift rod extends through the back of the faucet body. Pulling it up closes the drain stopper; pushing it down opens the drain. The entire assembly — including the stopper, linkage, and lift rod — is included with the faucet and is finished to coordinate with the Brushed Nickel faucet.

How do I replace the cartridge in the Moen 6191BN?

The 6191BN uses Moen's 1225 or 1225B cartridge (verify via Moen's parts lookup using your model number). Shut off the supply valves under the sink, remove the handle screw under the decorative cap, pull the handle, and extract the cartridge with cartridge puller pliers. Moen will send a replacement cartridge free of charge under its Limited Lifetime Warranty if the faucet drips.

Will the Brushed Nickel finish hold up over time?

Moen's Brushed Nickel is a PVD-bonded finish that resists tarnishing, corrosion, and everyday wear. It is covered under Moen's Limited Lifetime Warranty against finish defects, meaning Moen will replace the faucet if the finish peels, blisters, or corrodes under normal residential use.

What accessories are available in the Align Brushed Nickel finish to match this faucet?

The Align collection offers a full suite of bathroom accessories in Brushed Nickel including towel bars, towel rings, toilet paper holders, and robe hooks. Moen's collection pages list compatible accessory SKUs so you can coordinate the entire bathroom.