The Moen 6190BN is the high-arc variant of the Align single-hole bathroom faucet in Brushed Nickel. With a spout height of 3.22 inches and a reach of 3.56 inches, the elevated arc provides extra clearance for hand-washing and works particularly well over vessel sinks or deeper undermount basins. The sharp, angular Align silhouette is preserved through a squared spout tip and flat lever handle. A deck plate is included in the box for optional 3-hole sink installation, and the metal lift-rod pop-up drain assembly is coordinated to the Brushed Nickel finish. Flow is rated at 1.2 GPM, meeting WaterSense certification criteria.
Can the Moen 6190BN be used on a 3-hole sink?
Yes. An optional deck plate is included in the box specifically for this purpose. Install the faucet through the center hole and set the deck plate over all three holes to create a clean, finished look. The deck plate is finished in Brushed Nickel to coordinate with the faucet.
What is the difference between the 6190BN and the 6191BN?
Both are Align single-hole faucets in Brushed Nickel, but the 6190BN has a higher spout arc (3.22 in. height vs. 1.75 in.) and a shorter spout reach (3.56 in. vs. 4.50 in.). The 6190BN also includes a deck plate in the box; the 6191BN does not. Choose the 6190BN for vessel sinks or when extra clearance is important.
How does the lift-rod pop-up drain work on the 6190BN?
The lift rod connects through the back of the faucet body to a linkage system that operates the drain stopper. Pulling the rod up closes the drain; pushing it down opens it. The entire metal assembly is coordinated to Brushed Nickel and is included in the box.
How do I replace the cartridge if the faucet drips?
The 6190BN typically uses a Moen 1225 cartridge. Turn off the supply valves, remove the handle cap and screw, pull the handle off, then extract the cartridge using cartridge puller pliers. Moen supplies free replacement cartridges under the Limited Lifetime Warranty when the faucet develops a drip.
What Align Brushed Nickel accessories match the 6190BN?
Moen's Align collection in Brushed Nickel includes towel bars (18 in. and 24 in.), towel rings, toilet paper holders, and robe hooks. All are engineered to match the angular profile and matte-warm tone of the 6190BN faucet for a coordinated bathroom.
# Moen Align Single-Hole Single-Handle High-Arc Bathroom Faucet (Brushed Nickel) **Model:** `6190BN` **Brand:** Moen **Category:** Bathroom Faucet > The Moen 6190BN is the high-arc variant of the Align single-hole bathroom faucet in Brushed Nickel. With a spout height of 3.22 inches and a reach of 3.56 inches, the elevated arc provides extra clearance for hand-washing and works particularly well over vessel sinks or deeper undermount basins. The sharp, angular Align silhouette is preserved through a squared spout tip and flat lever handle. A deck plate is included in the box for optional 3-hole sink installation, and the metal lift-rod pop-up drain assembly is coordinated to the Brushed Nickel finish. Flow is rated at 1.2 GPM, meeting WaterSense certification criteria. ## Specifications | Attribute | Value | |---|---| | Product Type | Single-Hole Bathroom Faucet | | Collection | Align | | Finish | Brushed Nickel | | Finish Code | BN | | Mounting Holes | 1 | | Deck Plate Included | Yes | | Spout Height In | 3.22 | | Spout Reach In | 3.56 | | Flow Rate Gpm | 1.2 | | Handle Count | 1 | | Drain Included | Yes | | Drain Type | Metal lift-rod pop-up drain assembly | | Ada Compliant | Yes | | Supply Lines Included | Yes | | Warranty | Limited Lifetime | ## What's Included - (1) Moen Align High-Arc Faucet Body (6190BN) - (1) Single Lever Handle - (1) Metal Pop-Up Drain Assembly with Lift Rod - (1) Optional Deck Plate - (1) Red/Blue Temperature Indicators - (1) Flexible Supply Lines - (1) Mounting Hardware - (1) Installation Instructions Source: https://www.jaspecs.com/moen/bathroom-faucet/6190bn-moen-align-single-hole-bathroom-faucet-high-arc-brushed-nickel/