The Makita XSL06Z is a 36V (18V X2) LXT brushless 10 in. dual-bevel sliding compound miter saw with a built-in laser guide, sold as tool only. The brushless motor delivers 4,400 RPM and the 2-steel rail sliding system allows operation flush against a wall. It crosscuts up to 12 in. at 90 degrees, bevels 0 to 48 degrees in both directions, and miters 0 to 60 degrees left and right with positive stops at 0, 15, 22.5, 31.6, 45, and 60 degrees. With two 5.0Ah batteries, Makita rates up to 334 cuts per charge in 2x4 SPF. Batteries and charger sold separately.
Does the XSL06Z include batteries?
No. The XSL06Z is a tool-only model. It requires two 18V LXT batteries (sold separately) to operate. For a complete kit with two 5.0Ah batteries and a dual-port charger, look at the XSL06PT.
Can the XSL06Z run against a wall?
Yes. The 2-steel rail sliding system reduces the rear clearance needed during the cut, allowing the saw to be positioned close to a wall. This is a key advantage over older sliding miter saws that require significant rear clearance.
What is the maximum crosscut capacity of the XSL06Z?
At 90 degrees, the XSL06Z crosscuts up to 2-13/16 in. x 12 in., handling lumber up to a 4x12. It cuts 6-5/8 in. crown molding nested and 5-1/4 in. base molding vertical, making it well-suited for finish and trim work.
What bevel and miter ranges does the XSL06Z offer?
The bevel range is 0 to 48 degrees in both the left and right directions. The miter range is 0 to 60 degrees left and right, with positive stops at 0, 15, 22.5, 31.6, 45, and 60 degrees for quick, accurate setups at common angles.
How does runtime compare between XSL06Z and corded 10 in. miter saws?
With two 5.0Ah batteries, Makita rates up to 334 cuts per charge in 2x4 SPF. For most finish carpentry and trim work, this is enough for a full workday without recharging. Corded saws offer unlimited runtime but require access to an outlet, making the XSL06Z the more practical choice on jobsites without reliable power.
# Makita 36V (18V X2) LXT Brushless 10 in. Dual-Bevel Sliding Compound Miter Saw with Laser (Tool Only) **Model:** `XSL06Z` **Brand:** Makita **Category:** Miter Saw > The Makita XSL06Z is a 36V (18V X2) LXT brushless 10 in. dual-bevel sliding compound miter saw with a built-in laser guide, sold as tool only. The brushless motor delivers 4,400 RPM and the 2-steel rail sliding system allows operation flush against a wall. It crosscuts up to 12 in. at 90 degrees, bevels 0 to 48 degrees in both directions, and miters 0 to 60 degrees left and right with positive stops at 0, 15, 22.5, 31.6, 45, and 60 degrees. With two 5.0Ah batteries, Makita rates up to 334 cuts per charge in 2x4 SPF. Batteries and charger sold separately. ## Specifications | Attribute | Value | |---|---| | Product Type | Miter Saw | | Voltage | 36 | | Platform | LXT X2 | | Blade Diameter (in.) | 10 | | No-Load Speed (RPM) | 4,400 | | Max Bevel Left Deg | 48 | | Max Bevel Right Deg | 48 | | Max Crosscut 90 In | 12 | | Brushless | Yes | | Tool Only | Yes | | Battery Included | No | | Charger Included | No | | Weight (lbs) | 42 | | Warranty | 3-year limited | ## What's Included - miter saw - 10 in. carbide-tipped blade - dust bag - vertical clamp - triangular rule - hex wrench Source: https://www.jaspecs.com/makita/miter-saw/xsl06z-makita-36v-lxt-x2-brushless-10-in-miter-saw-tool-only/