The DWE43114N is a corded 4.5-in. to 5-in. paddle switch small angle grinder with a 13 Amp motor delivering 11,000 RPM and DEWALT's E-Clutch electronic protection system. The no-lock-on paddle switch cuts power immediately when released. Made in the USA, the DWE43114N is suited for fabricators and contractors who require domestic manufacturing provenance. Compatible with 4.5-in. and 5-in. Type 27 wheels. Carries DEWALT's 3-year limited tool warranty.
Is the DWE43114N made in the USA?
Yes. The DWE43114N is manufactured in the USA. This is notable among DEWALT's corded angle grinder lineup, where most models are sourced from China or India.
What is E-Clutch on the DWE43114N?
E-Clutch is DEWALT's electronic clutch system that shuts down the motor when a pinch or stall is detected, reducing kickback risk. The DWE43114N combines E-Clutch with a no-lock-on paddle switch for a dual-layer safety approach.
What disc sizes does the DWE43114N accept?
The DWE43114N accepts 4.5-in. (115mm) and 5-in. (127mm) Type 27 wheels. The included guard is sized for 5-in. wheels.
Does the DWE43114N have a lock-on switch?
No. The DWE43114N uses a no-lock-on paddle switch, which requires the operator to maintain grip for the tool to run. This is a job-site safety requirement in many industrial environments.
How many amps does the DWE43114N draw?
The DWE43114N uses a 13 Amp motor delivering 11,000 RPM. This is a higher output than the DWE402K/N's 11 Amp, providing more aggressive cutting and grinding capability.
What is the difference between the DWE43114N and DWE43144N?
The DWE43114N uses 4.5-in. to 5-in. wheels and is Made in USA, while the DWE43144N uses a 6-in. wheel and is manufactured in India. Both use no-lock-on paddle switches with E-Clutch. The 6-in. DWE43144N runs at a lower 9,000 RPM to suit the larger disc.
# DEWALT® 4-1/2-in. - 5-in. (115 - 127mm) Paddle Switch Small Angle Grinder, No Lock-On **Model:** `DWE43114N` **Brand:** DEWALT **Category:** Angle Grinder > The DWE43114N is a corded 4.5-in. to 5-in. paddle switch small angle grinder with a 13 Amp motor delivering 11,000 RPM and DEWALT's E-Clutch electronic protection system. The no-lock-on paddle switch cuts power immediately when released. Made in the USA, the DWE43114N is suited for fabricators and contractors who require domestic manufacturing provenance. Compatible with 4.5-in. and 5-in. Type 27 wheels. Carries DEWALT's 3-year limited tool warranty. ## Specifications | Attribute | Value | |---|---| | Product Type | Angle Grinder | | Cordless / Corded | Corded | | Power Source | AC | | Height (in.) | 4.9 | | Length (in.) | 17.5 | | Weight (lbs) | 6.7 | | Width (in.) | 6.3 | | Country of Origin | USA | | Barcode (UPC) | 885911471541 | | Piece Count | 4 | | Disc Diameter In | 5 | | No-Load Speed (RPM) | 11,000 | | Amps | 13 | | Warranty | 3-year limited (tool) | ## What's Included - (1) DWE43114N 4-1/2-in. - 5-in. Paddle Switch Grinder - (1) Side Handle - (1) Inner Flange - (1) Outer Flange - (1) 5-in. Type 27 Guard Source: https://www.jaspecs.com/dewalt/angle-grinder/dwe43114n-dewalt-4-12-5-in-115-127mm-paddle-switch-small-angle-grinder-no-lock-on/