The DWE43066 is a corded 6-in. small angle grinder with a 13 Amp motor delivering 9,000 RPM and DEWALT's E-Clutch electronic clutch system. E-Clutch shuts down the motor when a pinch or stall condition is detected, reducing the risk of kickback injury. The slide switch with lock-on is suited for extended grinding sessions. Three guards are included for both Type 27 and Type 1 wheel configurations. Compatible with 5-in. and 6-in. wheels. Carries DEWALT's 3-year limited tool warranty.
What is E-Clutch on the DWE43066?
E-Clutch is DEWALT's electronic clutch system that detects a pinch or stall event and shuts down the motor to reduce the risk of kickback. It reacts faster than a mechanical clutch, providing an additional layer of operator protection during aggressive grinding.
What disc sizes does the DWE43066 accept?
The DWE43066 accepts 5-in. (127mm) and 6-in. (150mm) wheels. Three guards are included: a 5-in. Type 27, a 6-in. Type 27, and a 6-in. Type 1.
Does the DWE43066 have a lock-on switch?
Yes. The DWE43066 uses a slide switch with lock-on, which holds the grinder on without requiring continuous trigger pressure. This is convenient for extended grinding sessions but means the operator must consciously switch the tool off.
How heavy is the DWE43066?
The DWE43066 weighs 8.85 lbs. This is heavier than 4.5-in. grinders but reflects the larger 6-in. wheel capacity and heavier motor required for the larger disc format.
What is the DWE43066 best used for?
The DWE43066 is suited for medium-to-heavy grinding and cutting on metal, concrete, and masonry where a 6-in. wheel increases surface coverage compared to a 4.5-in. grinder. The E-Clutch makes it appropriate for situations where kickback control is important.
How does the DWE43066 compare to the DWE43144N?
Both are 6-in. 13 Amp grinders with 9,000 RPM. The DWE43066 uses a slide switch with lock-on while the DWE43144N uses a no-lock-on paddle switch. The DWE43144N is manufactured in India while the DWE43066 is China-sourced.
# DEWALT® 6-in. (150mm) Small Angle Grinder with E-Clutch® **Model:** `DWE43066` **Brand:** DEWALT **Category:** Angle Grinder > The DWE43066 is a corded 6-in. small angle grinder with a 13 Amp motor delivering 9,000 RPM and DEWALT's E-Clutch electronic clutch system. E-Clutch shuts down the motor when a pinch or stall condition is detected, reducing the risk of kickback injury. The slide switch with lock-on is suited for extended grinding sessions. Three guards are included for both Type 27 and Type 1 wheel configurations. Compatible with 5-in. and 6-in. wheels. Carries DEWALT's 3-year limited tool warranty. ## Specifications | Attribute | Value | |---|---| | Product Type | Angle Grinder | | Cordless / Corded | Corded | | Power Source | AC | | Height (in.) | 5.5 | | Length (in.) | 22 | | Weight (lbs) | 8.85 | | Width (in.) | 8 | | Country of Origin | China | | Barcode (UPC) | 885911471589 | | Piece Count | 7 | | Disc Diameter In | 6 | | No-Load Speed (RPM) | 9,000 | | Amps | 13 | | Warranty | 3-year limited (tool) | ## What's Included - (1) DWE43066 6-in. Small Angle Grinder - (1) 5-in. (127mm) Type 27 Guard - (1) 6-in. (150mm) Type 27 Guard - (1) 6-in. (150mm) Type 1 Guard - (1) Side Handle - (1) Hex Key - (1) Inner Flange - (1) Outer Flange Source: https://www.jaspecs.com/dewalt/angle-grinder/dwe43066-dewalt-6-in-150mm-small-angle-grinder-with-e-clutch/