The DCG413FB is DEWALT's 20V MAX* XR® 5-in. flathead paddle-switch angle grinder designed for grinding applications in tight spaces. Its low-profile flathead design gives better access to confined areas compared to standard-height grinders. A brushless motor delivers 9,000 RPM no-load speed with POWER-LOSS RESET technology. The tool-only DCG413FB ships with wheel wrench, side handle, grinding guard, and cutting guard. It is compatible with the full DEWALT 20V MAX* XR® battery platform and carries DEWALT's 3-year limited tool warranty.
What makes the DCG413FB different from a standard 4.5-in. angle grinder?
The DCG413FB has a flathead (low-profile) head design that sits closer to the work surface, making it easier to reach into tight spaces and confined areas where a taller standard grinder head cannot fit.
Does the DCG413FB come with a KICKBACK BRAKE?
DEWALT's product page uses the term KICKBACK BREAK (not BRAKE) for this model, which refers to a safety design feature. Several Amazon reviewers note it does not include the active E-CLUTCH electronic kickback brake found on higher-end 60V MAX models — confirm with the current DEWALT spec sheet before purchasing if this feature is required.
Is the DCG413FB sold without a battery?
Yes. The DCG413FB is a bare-tool (tool-only) configuration. It does not include a battery or charger. Any DEWALT 20V MAX* XR® battery is compatible.
What disc size does the DCG413FB accept?
The DCG413FB accepts 4.5-in. (114mm) grinding and cutting wheels with a 5/8-in. arbor.
How fast does the DCG413FB spin?
The DCG413FB runs at up to 9,000 RPM no-load speed, driven by a brushless motor on the DEWALT 20V MAX* XR® platform.
What is included with the DCG413FB?
The DCG413FB ships with the grinder, a side handle, a grinding guard, a cutting guard, and a wheel wrench. No battery or charger is included.
# DEWALT® 20V MAX* XR® 5-in. (127mm) Flathead Paddle-Switch Small Angle Grinder with KICKBACK BREAK (Tool Only) **Model:** `DCG413FB` **Brand:** DEWALT **Category:** Angle Grinder > The DCG413FB is DEWALT's 20V MAX* XR® 5-in. flathead paddle-switch angle grinder designed for grinding applications in tight spaces. Its low-profile flathead design gives better access to confined areas compared to standard-height grinders. A brushless motor delivers 9,000 RPM no-load speed with POWER-LOSS RESET technology. The tool-only DCG413FB ships with wheel wrench, side handle, grinding guard, and cutting guard. It is compatible with the full DEWALT 20V MAX* XR® battery platform and carries DEWALT's 3-year limited tool warranty. ## Specifications | Attribute | Value | |---|---| | Product Type | Angle Grinder | | Voltage (V) | 20 | | Cordless / Corded | Cordless | | Power Source | Battery | | Motor Type | Brushless | | Tool Only | Yes | | Batteries Included | 0 | | Charger Included | No | | Piece Count | 5 | | Height (in.) | 5 | | Length (in.) | 14.72 | | Weight (lbs) | 4.75 | | Width (in.) | 6.1 | | Country of Origin | China | | Barcode (UPC) | 885911540216 | | Battery Platform | 20V MAX* XR® | | Disc Diameter In | 4.5 | | No-Load Speed (RPM) | 9,000 | | Switch Type | Paddle | | Warranty | 3-year limited (tool) | ## What's Included - (1) DCG413F 20V MAX* XR 5-in. Flathead Paddle-Switch Small Angle Grinder - (1) Side Handle - (1) Grinding Guard - (1) Cutting Guard - (1) Wheel Wrench Source: https://www.jaspecs.com/dewalt/angle-grinder/dcg413fb-dewalt-20v-max-xr-5-127mm-flathead-paddle-switch-small-angle-grinder-kickback/