The Danco Toilet Tank Flapper is a replacement toilet flapper for Toto. It seals the flush valve opening to prevent tank leaks, ghost flushing, and water waste, while restoring a full flush when the handle is pressed. It is meant to be a straightforward fix for common running-toilet problems.
Will this flapper stop a running toilet?
If the running toilet is caused by water leaking past a worn flapper, replacing the flapper is usually the correct fix. A new flapper should seal the flush valve opening and stop slow tank loss that causes periodic refills. If the valve seat is damaged or the chain is adjusted incorrectly, you may still need additional repair.
How do I confirm the flapper size?
Check your existing flapper and the flush valve opening before ordering. Many toilets use either a 2-inch or 3-inch flapper, and brand-specific designs can vary even within the same nominal size. Matching the brand named in the listing and measuring the opening will prevent the most common fit issue.
What do reviews say about fit and setup?
Reviews usually praise quick installation and immediate improvement when the flapper matches the toilet correctly. The most common complaints are sizing mistakes and small adjustment issues with the chain or float position. Buyers often recommend a quick measurement before ordering and a test flush after installation to fine-tune chain slack.
# Toilet Tank Flapper for Toto **Model:** `Toilet Tank Flapper` **Brand:** Danco **Category:** Toilet Flapper > The Danco Toilet Tank Flapper is a replacement toilet flapper for Toto. It seals the flush valve opening to prevent tank leaks, ghost flushing, and water waste, while restoring a full flush when the handle is pressed. It is meant to be a straightforward fix for common running-toilet problems. ## Specifications | Attribute | Value | |---|---| | Type | Toilet flapper | | Compatibility | Toto | ## What's Included - Toilet flapper - Chain - Hook Source: https://www.jaspecs.com/danco/toilet-flapper/toilet-tank-flapper-for-toto/