3M Pro-Pak Garnet Sanding Sheets provide natural garnet abrasive for woodworking and general hand sanding applications. The 100-grit intermediate cut is well suited for initial stock removal on bare wood, smoothing rough lumber, and preparing surfaces for finishing. Garnet mineral produces a warm, consistent scratch pattern that is compatible with most wood finishes. The durable paper backing stands up to hand sanding pressure. Each pack contains 25 sheets measuring 9 x 11 inches for economical, high-volume sanding use.
What is garnet sandpaper and why is it good for woodworking?
Garnet is a natural mineral abrasive that creates a sharp cutting edge at each grain fracture point. Woodworkers prefer garnet for hand sanding because it produces a fine scratch pattern that is compatible with oil, lacquer, and polyurethane finishes, and it is less likely to leave deep scratches that show through clear coats.
Is garnet sandpaper better than aluminum oxide for wood?
Garnet is preferred by hand woodworkers for fine finishing because it creates a softer scratch pattern. Aluminum oxide cuts more aggressively and lasts longer, making it better for power sanding or heavy stock removal. For final hand-sanding before finishing, garnet is often preferred.
Can garnet sandpaper be used on metal or drywall?
Garnet is not recommended for metal because it is too soft and will wear out quickly. For drywall, aluminum oxide is a better choice. Garnet is primarily intended for dry woodworking applications.
At 100 grit, is garnet paper good for removing old finish?
100 grit garnet can remove worn finish and smooth rough wood, but for heavy finish removal or stripping old paint, aluminum oxide or a coarser grit (60 or 80) is more efficient. Use 100 grit garnet for initial smoothing once most of the old finish is removed.
# 3M Pro-Pak Garnet Sanding Sheets, 100 Grit, 9 in x 11 in, 25 Sheets **Model:** `88595` **Brand:** 3M **Category:** Sandpaper > 3M Pro-Pak Garnet Sanding Sheets provide natural garnet abrasive for woodworking and general hand sanding applications. The 100-grit intermediate cut is well suited for initial stock removal on bare wood, smoothing rough lumber, and preparing surfaces for finishing. Garnet mineral produces a warm, consistent scratch pattern that is compatible with most wood finishes. The durable paper backing stands up to hand sanding pressure. Each pack contains 25 sheets measuring 9 x 11 inches for economical, high-volume sanding use. ## Specifications | Attribute | Value | |---|---| | Product Type | Sandpaper Sheet | | Grit | 100 | | Sheet Size In | 9 x 11 | | Abrasive Type | Garnet | | Backing | Paper | | Wet Dry | No | | Pack Count | 25 | | Barcode (UPC) | 051144885954 | Source: https://www.jaspecs.com/3m/sandpaper/88595-3m-garnet-sandpaper-100-grit/