The 3M™ Particulate Filter 7093 is a NIOSH-approved P100 filter designed for use with 3M™ bayonet-connection full and half facepiece respirators. It provides at least 99.97% filtration efficiency against oil and non-oil based aerosols, dust, mists, fumes, and particulates. The 7093 is encased in a hard plastic housing that protects the filter from damage, debris, sparks, and high temperatures — features that distinguish it from the thinner disc-style 2091 filter. Uses a bayonet-style connection compatible with 3M™ 6000, 6500, 7500 series half-facepieces and 6000, FF-400, 7800S series full-facepieces. Sold as a 1-pair (2 filters) pack.
What is the difference between the 3M 7093 and the 2091 P100 filter?
Both are NIOSH P100 bayonet-connection filters with the same 99.97% filtration efficiency. The key difference is physical design: the 7093 is housed in a hard plastic case that protects the filter media from physical damage, sparks, decontamination spray showers, and high temperatures. The 2091 is a flat disc design without the hard casing. The 7093 is preferred in welding, hazmat, and industrial environments where filter protection from the environment matters; the 2091 is more common in standard construction, painting, and light industrial use.
Which respirators is the 7093 compatible with?
The 7093 uses the standard 3M bayonet connection and fits 3M™ 6000 series half and full facepieces, 6500 and 7500 series half-facepieces, FF-400 series full-facepieces, and 7800S series facepieces. It also fits 3M™ Scott™ AV-3000 HT and AV-3000 SureSeal facepieces with the AV-632 bayonet adapter. It is listed under the 7000 Series filter family but fits the same facepieces as the 2000 Series.
Can I use the 7093 for mold removal and lead paint abatement?
Yes. The P100 rating meets the requirements for both mold remediation (EPA/OSHA minimum N95) and lead paint removal (OSHA minimum P100). The hard plastic casing of the 7093 also makes it useful in environments where filter integrity during rugged use is a concern. Follow all applicable OSHA and EPA guidelines and use a properly fit-tested facepiece.
Does the 7093 protect against gases and vapors?
No. The 7093 is a particulate-only filter and does not protect against organic vapors, acid gases, or other gaseous hazards. For combined vapor and particulate protection, pair the 7093 with a 6000 series gas cartridge (such as the 6001) or use a combination cartridge like the 60921 (OV/P100) or 60923 (OV/AG/P100).
When should I replace the 7093 filter?
Replace the 7093 when breathing resistance increases significantly, when it becomes visibly damaged or contaminated, or after use in highly contaminated environments. P100 filters do not lose particle filtration efficiency from particulate loading — they can actually improve — but increased breathing effort is the primary replacement indicator. Always follow your facility's written respiratory protection program.
Is the 7093 flame resistant?
Yes. 3M™ 7000 Series particulate filters including the 7093 are flame resistant, which is one reason they are preferred over the 2091 in welding and hot work environments. The hard plastic housing also resists warping from heat exposure, maintaining filter integrity in conditions where the 2091 disc filter might be damaged.
# 3M™ Replacement P100 Filters 7093, 1-pair, NIOSH-Approved **Model:** `7093` **Brand:** 3M **Category:** Respirator Filter > The 3M™ Particulate Filter 7093 is a NIOSH-approved P100 filter designed for use with 3M™ bayonet-connection full and half facepiece respirators. It provides at least 99.97% filtration efficiency against oil and non-oil based aerosols, dust, mists, fumes, and particulates. The 7093 is encased in a hard plastic housing that protects the filter from damage, debris, sparks, and high temperatures — features that distinguish it from the thinner disc-style 2091 filter. Uses a bayonet-style connection compatible with 3M™ 6000, 6500, 7500 series half-facepieces and 6000, FF-400, 7800S series full-facepieces. Sold as a 1-pair (2 filters) pack. ## Specifications | Attribute | Value | |---|---| | Product Type | Respirator Filter | | Filter Type | P100 Particulate | | Niosh Approval | Yes | | Compatible Series | 6000, 6500, 7500, 7800S, FF-400 | | Pack Count | 2 | | Barcode (UPC) | | Source: https://www.jaspecs.com/3m/respirator-filter/7093-3m-p100-particulate-filter-7000-series/