3M™ Odor/Particulate Cartridge 60921, Organic Vapor/P100 1-pair of 60921 Cartridges/Filters

What does the 3M 60921 protect against?

The 60921 provides dual protection: NIOSH-approved organic vapor protection (the same as the standalone 6001 cartridge) plus P100 particulate filtration at 99.97% efficiency against oil and non-oil based aerosols. It is designed for environments with both vapor and particulate hazards, such as spray painting, staining, varnishing, solvent application, and pesticide spraying. It also provides nuisance odor reduction from organic vapors in DIY and home use contexts.

What is the difference between the 60921 and using a 6001 cartridge with a 2091 filter?

Functionally, both provide OV and P100 protection. The 60921 is an integrated unit where the P100 filter is permanently built into the cartridge housing. The 6001 plus 2091 combination requires attaching the 2091 filter directly to the facepiece bayonet in front of a 6001 cartridge via a stacked arrangement. The 60921 is more convenient and compact; the 6001/2091 combo allows independent replacement of each component.

Which 3M facepieces is the 60921 compatible with?

The 60921 uses a bayonet-style connection and is compatible with 3M™ 6000, 6500, and 7500 series half-facepieces. It also fits 3M™ Multi-Purpose Reusable Respirator 65021 as a direct cartridge replacement. It uses the same bayonet connection as other 6000 series cartridges, so it fits any 3M facepiece that accepts bayonet cartridges.

When should I replace the 60921 combination cartridge?

Replace the 60921 when breathing resistance increases significantly (indicating P100 filter loading), when you detect organic vapor odors through the cartridge (indicating carbon saturation), or on a documented change-out schedule. Because it combines two different filtration media with potentially different service lives, it is generally replaced as one unit rather than replacing components separately.

Can I use the 60921 for mold remediation?

Yes. The P100 rating meets or exceeds requirements for mold remediation, which typically calls for at least N95 protection. The additional OV component provides protection from chemical odors or low-level vapors that may be present during mold cleanup or remediation with biocides. Always follow applicable EPA and OSHA guidance for mold remediation and use a properly fit-tested respirator.